科学研究
当前位置:首页  科学研究  论文
2015年发表论文
发布人:王亚明  发布时间:2016-03-20   浏览次数:72

1、Yang H., Ye F., Liu Q., Liu S., Gao Y., Liu L. A novel silica aerogel/porous si3n4 composite prepared by freeze casting and sol-gel impregnation with high-performance thermal insulation and wave-transparent. Materials Letters, 2015, 138: 135–138.

2、Yang H., Ye F., Liu Q.,  Gao Y. Microstructure and properties of the si3n4/silica aerogel composites fabricated by the sol–gel method via ambient pressure drying. Materials & Design, 2015, 85: 438–443.

3、Lin S., Ye F., Ma J., Ding J., Liu Q., Dong S. Fabrication and properties of porous boron nitride/silicon oxynitride ceramic composites via gas pressure sintering. Materials & Design, 2015, 87: 272-277.

4、Lin S., Ye F., Dong S.,Ma J., Zhang B.,  Ding J. Mechanical, dielectric properties and thermal shock resistance of porous silicon oxynitride ceramics by gas pressure sintering. Materials Science & Engineering A, 2015, 635: 1–5.

5、Zhang B., Ye F., Liu S., Liu Q., Gao Y. High-k and ultra-low-loss badcy/ni0.5ti0.5nbo4 composites for pcb application fabricated by cold isostatic pressing and vacuum assisted infiltration processes. Journal of Materials Science Materials in Electronics, 2015, 26: 7823-7828.

6、Zhang B., Ye F., Gao Y., Liu Q., Liu S., Liu L. Dielectric properties of BADCy/Ni 0.5 Ti 0.5 NbO 4 composites with novel structure fabricated by freeze casting combined with vacuum assisted infiltration process. Composites Science and Technology, 2015, 119: 75-84.

7、Zhang B., Ye F., Liu S., Zhang H., Liu Q., Gao Y., Ma J. Fabrication and properties of BADCy/Ni 0.5 Ti 0.5 NbO 4/ZnNb 2 O 6 composites for dielectric device application. Journal of Alloys and Compounds, 2016, 658: 476-482.

8、Liu S., Ye F., Liu L., Liu Q. Feasibility of preparing of silicon nitride ceramics components by aqueous tape casting in combination with laminated object manufacturing. Materials & Design, 2015, 66: 331–335.

9、Ye F., Liu S., Yang H., Liu Q., Zhang B. A route to increase fracture toughness of layered si3n4/sic composite using interlocked interfaces.  Ceramics International, 2015, 41(8): 10331–10335.

10、Liu S., Ye F., Yang H., Liu Q., Zhang B. A new way of fabricating si3n4 ceramics by aqueous tape casting and gas pressure sintering. Journal of Alloys & Compounds, 2015, 647: 686–692.

11、Liu S., Ye F., Liu L., Liu. Q., Li.J. Preparation of aluminum nitride ceramics by aqueous tape casting. Materials & Manufacturing Processes, 2015, 30(5):  605-610(6).

12、Liu S., Ye F., Yang H., Liu Q., Zhang B., Gao Y, Liu W. Fabrication and properties of sic/si3n4 multilayer composites with different layer thickness ratios by aqueous tape casting. Ceramics International, 2015, 41: 12917- 12922.

13、Liu S., Ye F., Liu Q., Yang H., Zhang B. Production of Si3N4/glass composites for ltcc substrate by aqueous tape casting process. International Journal of Applied Ceramic Technology, 2015: 1-8.

14、Zhong L., Liu L., Worsch C., Gonzalez J., Springer A., Ye F. Transient liquid phase sintering of tantalum carbide ceramics by using silicon as the sintering aid and its effects on microstructure and mechanical properties. Materials Chemistry and Physics, 2015, 149: 505-511.

15、Guo J W, Sun S Y, Wang Y M, Zhou Y, Wei D Q, Jia D C. Hydrothermal biomimetic modification of microarc oxidized magnesium alloy for enhanced corrosion resistance and deposition behaviors in SBF. Surface and Coatings Technology,  2015, 269: 183-190.

16、Tian H, Wang Y M, Guo L X, Ouyang J H, Zhou Y, Jia D C. Oxidation Resistance of AlPO4 Bonded Ceramic Coating Formed on Titanium Alloy for High-Temperature Applications. International Journal of Applied Ceramic Technology, 2015, 12: 614-624.

17、Jianyun Cao, Xiaohong Li, Yaming Wang, Frank C. Walsh , Jia-Hu Ouyang, Dechang Jia, Yu Zhou. Materials and fabrication of electrode scaffolds for deposition of MnO2 and their true performance in supercapacitors. Journal of Power Sources, 2015, 293: 657-674.

18、Jianyun Cao, Yaming Wang, Junchen Chen, Xiaohong Li, Frank C. Walsh, Jia-Hu Ouyang, Dechang Jia, Yu Zhou. Three-dimensional graphene oxide/polypyrrole composite electrodes fabricated by one-step electrodeposition for high performance supercapacitors. Journal of Materials Chemistry A,  2015, 3: 14445–14457.

19、Junchen Chen, Yaming Wang, Jianyun Cao, Yan Liu, Jia-Hu Ouyang, Dechang Jia, Yu Zhou. Flexible and solid-state asymmetric supercapacitor based on ternary graphene/MnO2/carbon black hybrid film with high power performance. Electrochimica Acta, 2015, 182: 861-870.

20、Liang Bin, Yang Zhihua, Zhu Qishuai, Miao Yang,  Jia Dechang, Wang Shengjin, He Peigang,  Duan Xiaoming,  Zhou Yu. Pure SiC Monoliths with Excellent Oxidation Resistance Sintered at Low Temperatures and High Pressures. Ceramics International, 2015, 41 (10):15227-15230.

21、Liang Bin, Yang Zhihua, Li Yuetong, Yuan Jingkun, Jia Dechang, Zhou Yu. Ablation behavior and mechanism of SiCf/Cf/SiBCN ceramic composites with improved thermal shock resistance under oxyacetylene combustion flow. Ceramics International, 2015, 41(7): 8868-77.

22、Peigang He, Zhihua Yang, Jinglei Yang, Xiaoming Duan, Dechang Jia, Shengjin Wang, Yu Zhou, Yujin Wang, Peifeng Zhang. Preparation of fully stabilized cubic-leucite composite through heat-treating Cs-substituted K-geopolymer composite at high temperatures. Composites Science and Technology, 2015, 107(11): 44-53.

23、Shu Yan, Peigang He, Dechang Jia, Zhihua Yang, Xiaoming Duan, Shengjin Wang, Yu Zhou. In situ fabrication and characterization of graphene/geopolymer composites. Ceramics International, 2015,41(9)11242-11250.

24、Delong Cai, Zhihua Yang, , Xiaoming Duan, Bin Liang, Qian Li, Dechang Jia, Yu Zhou. A novel BN–MAS system composite ceramics with greatly improved mechanical properties prepared by low temperature hot-pressing. Materials Science and Engineering: A2015,633: 194-199.

25、Daxin Li, Zhihua Yang, Dechang Jia, Xiaoming Duan, Peigang He, Yu Zhou. Ablation behavior of graphene reinforced SiBCN ceramics in an oxyacetylene combustion flame. Corrosion Science, 2015(100): 85-100.

26、Daxin Li, ZhihuaYang, DechangJia, XiaomingDuan, PeigangHe, JieYu, YuZhou. Spark plasma sintering and toughening of graphene platelets reinforced SiBCN nanocomposites. Ceramics International, 2015 (41): 10755-10765.

27、Daxin Li, Zhihua Yang, Zhubo Mao, Dechang Jia, Delong Cai, Bin Liang, Xiaoming Duan, Peigang He, Jiancun Rao. Microstructures, mechanical properties and oxidation resistance of SiBCN ceramics with the addition of MgO, ZrO2 and SiO2 (MZS) as sintering additives. RSC Advances, 2015 (5): 52194-52205.

28、Daxin Li, Zhihua Yang, Dechang Jia, Chengchuan Hu, Bin Liang, Yu Zhou. Preparation, microstructures, mechanical properties and oxidation resistance of SiBCN/ZrB2-ZrN ceramics by reactive hot pressing. Journal of the European Ceramic Society, 2015, 35: 4399-4410.

29、Xiaoming Duan, Lu Shen, Dechang Jia, Yu Zhou, Sybrand van der Zwaag, Willem G. Sloof. Synthesis of high-purity, isotropic or textured Cr2AlC bulk ceramics by spark plasma sintering of pressure-less sintered powders. Journal of the European Ceramic Society, 2015, 35(5): 1393–1400.

30、Xiao-jing Kou, Hua Ke, Chun-bo Zhu, Peter Rolfea. First-principles study of the chemical bonding and conduction behavior of LiFePO4. Chemical Physics, 2015, 446: 1-6.

31、Li B, Wang L, Xu F, Gang X, Demirci U, Wei D, Jia D, Zhou Y. Hydrosoluble, UV-crosslinkable and injectable chitosan for patterned cell-laden microgel and rapid transdermal curing hydrogel in vivo. Acta Biomater, 2015, 22: 59-69.

32、Li B, Wang L, Guo J, Xu F, Wei D, Feng Y, et al. Cell laden and patterned chitosan microgel for micro-scale tissue engineering. Journal of Controlled Release, 2015, 213: 9.

33、Chen Lei, Wang Yujin,  Rao Jiancun, Zhou Yu. Influence of ZrO2 Content on the Performances of BN-ZrO2-SiC Composites for Application in the Steel Industry. Materials Science and Engineering A, 2015, 12(3): 345-351.

34、Zhao YanWei, Wang YuJin, Jin XiuYu, Peng Jia, Lei Chen, Yu Zhou, GuiMing Song, JunPing Li, ZhiHai Feng. Microstructure and properties of ZrC-W composite fabricated by reactive infiltration of Zr2Cu into WC/W perform. MATERIALS CHEMISTRY AND PHYSICS, 2015, 153: 17-22.

35、王东, 王玉金. 碳化锆陶瓷复合材料的制备、显微组织与性能. 无机材料学报,2015, 30(5): 449-458.

36、Jun Xiang, JiaHu Ouyang, ZhanGuo Liu, GuoChao Qi. Influence of pentavalent niobium doping on microstructure and electrical conductivity of oxy-apatite La10Si6O27 electrolytes. Electrochimica Acta, 2015, 153: 287-294.

37、XiuPing Zhang, JiaHu Ouyang, ZhanGuo Liu, YuJin Wang, YaMing Wang, Yu Zhou. Crack-healing ability and strength recovery of different hot-pressed TZ3Y20A-SiC ceramics by heat treatment in air. Materials & Design, 2015, 67: 324-329.

38、JiaHu Ouyang, YuanHong Wang, ZhanGuo Liu, YaMing Wang, YuJin Wang. Preparation and high-temperature tribological properties of microarc oxidation ceramic coatings formed on Ti2AlNb alloy. Wear, 2015, 330-331: 239-249.

39、JiaHu Ouyang, ChengCheng Shi, ZhanGuo Liu, YaMing Wang, YuJin Wang. Fabrication and high-temperature tribological properties of self-lubricating NiCr-BaMoO4 composites. Wear, 2015, 330–331: 272-279.

40、JiaHu Ouyang, Cheng Zhu, ZhanGuo Liu, Zhe Ren, Lin Jing. Influence of Sm3+ doping on microstructure and electrical properties of ((Nd0.7Yb0.3)1–xSmx)2Zr2O7. Functional Materials Letters, 2015, 8(3): 1540012.

41、Jun Xiang, JiaHu Ouyang, ZhanGuo Liu. Microstructure and electrical conductivity of apatite-type La10Si6–xWxO27+δ electrolytes. Journal of Power Sources, 2015, 284: 49-55.

42、ZhanGuo Liu, RenXian Zhu, JiaHu Ouyang, Yu Zhou. Densification, microstructure and hardness of Sm2Zr2O7/SmAlO3 ceramic composites. Journal of Ceramic Processing Research, 2015, 16(4): 397-401.

43、XiuPing Zhang, JiaHu Ouyang, YuJin Wang, ZhanGuo Liu, YaMing Wang. Microstructure and high-temperature mechanical properties of ZrO2-Al2O3-SiC ceramics. Journal of Materials Engineering and Performance, 2015, 24(9):  3615-3621.

44、YuanHong Wang, ZhanGuo Liu, JiaHu Ouyang, YaMing Wang, Yu Zhou.Influence of electrolyte compositions on structure and high-temperature oxidation resistance of microarc oxidation coatings formed on Ti2AlNb alloy.Journal of Alloys and Compounds, 2015, 647: 431-437.

45、ZhanGuo Liu, WeiHeng Zhang, JiaHu Ouyang, Yu Zhou. Novel thermal barrier coatings based on rare-earth zirconates/YSZ double-ceramic-layer system deposited by plasma spraying. Journal of Alloys and Compounds,  2015, 647: 438-444.

46、XiuPing Zhang, JiaHu Ouyang, ZhanGuo Liu, YuJin Wang, YaMing Wang. Crack-healing behaviour and strength recovery of hot-pressed TZ3Y20A-MoSi2 ceramics. Materials Science & Engineering A, 2015, 648: 299-304.

47、ZhanGuo Liu, KaiJun Hu, JunYu Jin, JiaHu Ouyang, Yu Zhou. Preparation and photoluminescence properties of Er3+­doped La2Zr2O7 nanocrystals. Journal of Alloys and Compounds, 2015, 653: 122-125.

48、Rui Zhou, Daqing Wei, Jianyun Cao, Wei Feng, Su Cheng, Qing Du, Baoqiang Li, Yaming Wang, Dechang Jia and Yu Zhou. Conformal coating containing Ca, P, Si and Na with double-level porous surface structure on titanium formed by a three-step microarc oxidation. RSC Adv, 2015, 5:  28908-28920.

49、Rui Zhou, Daqing Wei, Hua Ke, Jianyun Cao, Baoqiang Li, Su Cheng, Wei Feng, Yaming Wang, Dechang Jia and Yu Zhou. H2Ti5O11ĴH2O nanorod arrays formed on a Ti surface via a hybrid technique of microarc oxidation and chemical treatment. CrystEngComm, 2015, 17: 2705-2717.

50、Rui Zhou, Daqing Wei, Jianyun Cao, Wei Feng, Su Cheng, Qing Du, Baoqiang Li, Yaming Wang, Dechang Jia and Yu Zhou. Synergistic Effects of Surface Chemistry and Topologic Structure from Modified Microarc Oxidation Coatings on Ti Implants for Improving Osseointegration. ACS Appl. Mater. Interfaces, 2015, 7: 8932-8941

51、Rui Zhou, Daqing Wei, Jianyun Cao, Wei Feng, Su Cheng, Qing Du, Baoqiang Li, YamingWang,Dechang Jia, Yu Zhou. The effect of NaOH concentration on the steam-hydrothermally treated bioactivemicroarc oxidation coatings containing Ca, P, Si and Na on pure Ti surface. Materials Science and Engineering C, 2015, 49: 669-680.

52、Daqing Wei, Wei Feng, QingDu, RuiZhou, BaoqiangLi, YamingWang, YuZhou, DechangJia. Synergistic Effects of Surface Chemistry and Topologic Structure from Modified Microarc Oxidation Coatings on Ti Implants for Improving Osseointegration. Ceramics International,  2015, 41: 13115-13125.